Fully equipped repair workshop
Perfect Timing is a fully equipped repair workshop based at Bayshore Ranch. Book a time, bring or tow the vehicle in, and the work is done here: engine and transmission rebuilds and replacements, diesel work, walnut blasting, hot rods, restoration, paint correction and detailing, plus everyday diagnostics and repairs.
Available 24/7*AI-assisted after hours. Tony confirms your appointment.
17686 Saddleback Loop, North Fort Myers, FL 33917 (Bayshore Ranch). Come by or drop the car off and leave it. Call or text (239) 397-2048 first so Tony knows it is coming. Get directions
How It Works
Inside the Workshop
Engines come apart here, get cleaned and inspected, and are measured before anyone recommends a path. Tolerance checks (bearing clearances, bore and crankshaft measurements) show whether the block is worth rebuilding or whether a replacement engine makes more sense. Rebuilt or replaced, the assembly and installation happen in this workshop.
An engine is only as good as its clearances and its timing. Parts are measured against the manufacturer’s specifications during assembly, and timing chains and belts are set up and verified before the engine runs. That is the difference between an engine that was put together and one that was built to spec.
Transmission work starts with a diagnosis: shifting, slipping, fluid condition and codes. If the transmission has to come out, the removal, rebuild or replacement and the reinstall are all done here.
On direct-injection engines, fuel no longer washes over the backs of the intake valves, so carbon can build up there over time. Heavy deposits can cause rough idle, misfires and lost power. Walnut blasting uses crushed walnut shell media to clean the valves back to metal with the intake off.
Diesel diagnosis and repair, hot rod builds and restoration projects all need time on a lift and space to work. That is what the workshop is for.
Paint work, buffing, paint correction and detailing, from swirl marks and oxidized paint to a full interior and exterior detail.
Every job starts with finding the cause: scan tools, live data and targeted tests, not guesses. That includes no-start problems, warning lights and electrical faults.
Walnut Blasting
Gallery
Visiting the Workshop
Book It
FAQ
Yes, by appointment. The workshop is based at Bayshore Ranch and has no walk-in counter, so call or text (239) 397-2048 to book a drop-off time. The drop-off details come with your booking.
Tow it in at the booked drop-off time. Concierge pickup and return is also available as a paid add-on; ask when you book.
Yes. Engines and transmissions are rebuilt or replaced in the workshop. For engines, Tony tears it down and measures it first, so the rebuild-or-replace decision is based on what the parts show.
Walnut blasting cleans carbon deposits off the intake valves using crushed walnut shell media. It is most often needed on direct-injection engines, where fuel no longer washes over the valves and carbon builds up over time.
Yes. Diesel repair, hot rod work and restoration projects are all done in the workshop.
17686 Saddleback Loop, North Fort Myers, FL 33917, at Bayshore Ranch. You can come to the workshop or drop the car off and leave it. Call or text first so Tony knows it is coming. Get directions.
Keep Browsing